FlexBumper for Awesomatix A12 MAX-09-003
The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!
You may ask what are the advantages over foam bumpers? We can answer that:
- absorbs hits better and doesn't transfer them as much into the chassis structure
- more robust and sturdy
- it always goes back to original shape and don't drag on the floor after a crash
- improved style/optics :-)
Our MXLR FlexBumper for the Awesomatix A12 offers the original shape! It's a direct replacement for the kit foam.
Only change we made, is that we removed the recess area on the lower side. Our tests showed that more ground clearance is a advantage, especially on carpet with higher floor/fuzz. This reduces touching and dragging on the ground and keeps the corner speed higher!
MXLR FlexBumper = ~5,5g.
Original Kit Bumper = ~3,5g.
1x MXLR FlexBumper for Awesomatix A12
Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.
INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here: INSTRUCTIONS